CompuDAS, a leader in Industrial Control and Monitoring has completed installation of their CPC-16EX Control and Data Acquisition System into a PEC (Process Electronics Corp) anodizing rectifier for an aerospace manufacturer.

Cessna Aircraft Company, who has been successfully using the CPC-16EX for control and data acquisition for their composite curing ovens since January 2009, required that the CompuDAS system be installed to control and monitor the PEC rectifier utilizing customer defined recipe parameters.

The CompuDAS CPC-16EX is a complete, flexible, stand alone Control and Data Acquisition System designed to monitor, document and control processes for Ovens, Autoclaves, Furnaces and Presses. Process measurements are stored on the CPC-16EX control systems solid state hard drive for transmission to the operator PC as desired. This allows the control system to operate even if the operator PC should happen to fail during a run.

The CPC-16EX Control and Data Acquisition System generates files that are windows compatible. The user interface software is a windows based application providing recipe creation, recipe recall, process monitoring, data file archiving, report generation and operator high-level control. A secure PC connection allows for monitoring of processes remotely. This feature minimizes Continue Reading

CompuDAS, a leader in Industrial Control and Monitoring, has completed the installation of two of their CPC-16EX Control and Data Acquisition Systems for a Chinese Helicopter Manufacturer (Jingdezhen, Jiangxi, Peoples Republic of China). The systems are being used to monitor and control composite curing ovens provided by Wisconsin Oven Corporation. CompuDAS provided special Chinese language software and instructions for operator control of the units.

The COMPUDAS CPC-16EX is a complete, flexible, stand alone Control and Data Acquisition System designed to monitor, document and control processes for Ovens, Autoclaves, Furnaces and Presses. Process measurements are stored on the CPC-16EX control systems solid state hard drive for transmission to the operator PC as desired. This allows the control system to operate even if the operator PC should happen to fail during a run.

The CPC-16EX Control and Data Acquisition System generates files that are windows compatible. The user interface software is a windows based application providing recipe creation, recipe recall, process monitoring, Continue Reading

CompuDAS, a leader in Industrial Control and Monitoring, announces its newest entry in Critical Process Monitoring and Control, the CPM-16. The CPM-16 provides high-speed, low cost communication utilizing proprietary Window Based Software and Ethernet connectivity.

Designed for plant wide process and environmental monitoring, the CPM-16 is a multi-channel system capable of monitoring from 16 to 256 independent channel inputs which may be any combination of thermocouples, RTD’s, pressure transducers or almost any voltage or current based sensors. Expansion boards may be remote from the base unit for SCADA applications.

The basic CPM-16 system can be configured as a desktop or wall mounted unit and includes a single Board Computer with built-in solid state Hard Drive that can store over three million readings even if the operator PC is “off-line”. Additional storage is available if required.

The data is retrieved and maintained in Windows Excel compatible csv files, eliminating the cost of additional software and training for viewing data. Process monitoring, data file archiving, report generation and operator high-level control are accomplished through our CPMon Windows application. Secure PC connection allows for monitoring of processes remotely. This feature minimizes downtime Continue Reading